How long does an AC repair usually take?

A simple repair like a capacitor swap can take under an hour. A refrigerant leak repair or compressor replacement takes several hours or may need a second visit once parts arrive.

How do I know if my AC really needs repair?

If the air coming out of the vents is warm, the unit cycles on and off frequently, or you hear strange noises like buzzing or rattling, it is time to have it checked.

What can hold up a repair job?

If the failed part is not commonly stocked on our truck, we have to order it. Hard-to-reach equipment, bad weather, or additional problems found during testing can also add time.

How does the estimate work?

We diagnose the problem first, then give you a written estimate that lists the part and labor. You approve it before we start any repair. No work is done without your okay.

What is left behind after the repair?

We remove all old parts, packaging, and debris. We test the system and clean up the work area. Nothing is left behind except a working air conditioner.

What do I need to do before the technician arrives?

Make sure the area around the indoor and outdoor units is clear of furniture, tools, and debris. That is all. We handle the rest from there.

AACA Appliance & Air Conditioning

(512) 219-0900 Get Free Estimate

ACA Appliance & Air Conditioning

AC Repair

Name: ACA Appliance & Air Conditioning
Address: Bertram, TX
Telephone: +15122190900
Rating: 4.2

AC Repair in Bertram, TX. Free, no-pressure estimates.

4.2 stars on Google

From 50 verified customer reviews.

Local, and close by

Covering Bertram, TX and the surrounding Hill Country.

Free estimates

Tell us what needs doing and we will come out and take a look.

The work

About our ac repair

A broken air conditioner in the Texas Hill Country heat is more than an inconvenience—it can make a home unsafe. When a customer calls, the system is usually blowing warm air, not cooling at all, or making unusual noises. The situation is urgent, and the first step is getting a trained technician on site to find out what went wrong.

Our crew arrives and begins with a full system check: testing the compressor, checking refrigerant pressure, inspecting the evaporator and condenser coils, and testing electrical components like the capacitor and contactor. We use a multimeter, manifold gauges, and a thermometer to isolate the failure. Once the problem is identified, we explain the repair and the parts needed.

The cost and time of a repair vary with the part that failed and how accessible it is. A capacitor on top of the unit is a quick swap, while a refrigerant leak in a buried line set takes longer to locate and fix. The age of the system, the condition of the coils, and the outdoor temperature can all affect how a repair is done and what it involves.

On the day of the repair, we protect the area around the unit with drop cloths and work carefully to avoid damaging landscaping. After the repair, we test the system, clean up all debris, and remove any old parts. The customer does not need to do anything beforehand except ensure the area around the unit is clear. Afterward, we explain what was done and how to monitor the system.

Hard Start Kit

A hard start kit gives the compressor an extra jolt of power during startup, often used on older units or those with a failing run capacitor.

Refrigerant Leak Detection

We use electronic leak detectors and sometimes inject a UV dye into the system to find the exact spot where refrigerant is escaping.

How we work

Same crew from quote to clean-up
We drive out to your place
We explain what we find
We clean up before we leave
The same number after the job
We test everything before we go

ACA Appliance & Air Conditioning

Get a Free Quote

How the job runs

Our 4-step ac repair process

Arrive and Assess

We roll up, introduce ourselves, and listen to the issue. Then we check the thermostat, air handler, and outdoor unit to understand the symptoms.

Diagnose the System

Using gauges, a multimeter, and a thermometer, we test refrigerant pressures, electrical draw, and component function to pinpoint the failure.

Present Repair Options

We explain what failed, show you the part if possible, and give a written estimate for the repair. You decide how to proceed, with no pressure.

Repair and Test

We replace the faulty part, recharge refrigerant if needed, and run the system through a full cooling cycle to confirm it works right.

AC Repair, ACA Appliance & Air Conditioning

The difference

Why ACA Appliance & Air Conditioning for ac repair

Full System Check
We do not just swap a part and leave. We run a complete diagnostic on the whole system to catch any other issues before they become problems.
Parts on the Truck
Our crew stocks common AC parts like capacitors, contactors, and motors so we can often finish the repair in a single visit without waiting on a delivery.
Clear Estimate First
Before any work begins, you get a written breakdown of the repair and the cost factors. No surprises, no hidden charges, and no pressure to approve extras.